48
REPLACING THE BRITA WATER FILTER
Only BRITA INTENZA water filters can be used with your
T.O by Lipton
machine.
The cartridge must be replaced 4 times per year or sooner if the machine indicates
it to ensure optimum filtration performance and machine protection.
BRITA INTENZA water filters are available on the website www.TO-Lipton.com.
Procedure for changing the BRITA INTENZA water
filter:
Step 1
Remove the water tank from the machine and empty
it.
Step 2
Remove the new filter cartridge from the protective
packaging.
Step 3
On the bottom side of the water filter cartridge you
will find a ring. Please leave the ring at the factory
setting (letter “C”). If not already the case, please
turn the ring to position ‘C’ as shown.
Step 4
With the water tank removed from the machine,
push the filter firmly and vertically to the bottom
of the water tank, so it clicks into place noticeably.
Make sure that the filter is installed securely in the
water tank. A tight fit guarantees optimal filtration
performance of the cartridge.
Step 5
Place the water tank on the machine. Then fill the
water tank with water to the Maximum mark (MAX).
Place a large cup that can easily hold 250ml on the
cup stand underneath the pouring spout.
