18
www
.e
fut
ur
o
.c
om • www
.e
fut
ur
o
.c
om • www
.e
fut
ur
o
.c
om • www
.e
fut
ur
o
.c
om • www
.e
fut
ur
o
.c
om • www
.e
fut
ur
o
.c
om • www
.e
fut
ur
o
.c
om •
www
.e
fut
ur
o
.c
om
OPERATING INSTRUCTIONS
efuturo Wallbox
Socket version:
LED display
Active function
No electrical power supply
Switched off
Wallbox switched off, no function
Blue
Light shines
Establish connection
Blue
Light flashes
Connection OK
Green
Light shines
Charging active
Green
Light flashes
Charging process completed
Red
Light shines
Overheating, charging interrupted
Red
Light flashes
Fault, no charging process
RFID version:
LED display
Active function
No electrical power supply
Switched off
Wallbox switched off, no function
Blue
Light shines
Establish connection
Blue
Light flashes
Connection OK
Green
Light flashes
Charging active
Green
Light shines
Charging process completed
Red
Light shines
Overheating, charging interrupted
Red
Light flashes
Fault, no charging process
Charging the vehicle
Warning
Risk of injury due to incorrect handling!
Using an extension cable or a second charging cable represents a risk of electric shock or cable fire. Using extension
cables is not permitted.
• Always use only one charging cable to connect electric or hybrid vehicles and the charging station
• Only use undamaged charging cables
!
Starting the charging process
It is possible to use the charging station without access control.
For charging stations with RFID access control, prior authorisation via the RFID transponder card at the charging station
is required.
Make sure that the vehicle and charging cable are suitable for Mode 3 charging.
1. Connect the charging cable to the vehicle.
2. Check that the charging cable is correctly positioned in the vehicle and on the Wallbox (for the socket version).
3. (RFID version) Start the charging process by RFID card*.
The charging station now automatically carries out the following steps:
• Detection of current capacity
• Check of the conditions for proper charging
• Communication with the vehicle via the CP contact. The protective earth connection is checked at the same time
• The charging station locks the plug mechanically (for charging stations with integrated charging socket Type 2 and the
optional magnetic lock). The vehicle signals to the charging station that it is ready for charging. The charging process
starts.
