13
EN
LAN NETWORK CONNECTIONS AND POWER WIRING
The keypad can be connected to the lares 4.0 platform in two ways:
•
if PoE powered
, simply connect the network cable from switch to the RJ45 Eth port
of keypad;
•
if not PoE powered
, in addition to what has been described above,
connect the
power supply
: the [+] terminal of the jack adapter must be connected to the [+P]
terminal coming from the panel and the [-] terminal of the jack adapter to the negative
power supply of the panel (see table below):
If the keypad is NOT PoE powered
, execute the power wiring of jack adapter
terminals.
Jack adapter
lares 4.0
+
+P
-
-
WARNING!
For connecting the jack to the keypad DC-IN, it is necessary to unscrew
or move sideways the ground connector that partially block the entrance, if present.
