10
DISPLAY
The display shows all the information and the data
ergo wls
can manage. The display can show up to 2 lines ,16
characters each, but ergo has an automatic scroll system to show 32 characters rows.
CONTRAST ADJUSTMENT
Acting on keys “Left” or “Right” when keypad is idle, a sliding bar used for contrast adjustment will be enabled.
The ENTER key will store the new contrast value, the ESC key will leave value unchanged.
Values will change on a 3 seconds key holding.
KEYPAD
KEYPAD FUNCTION DESCRIPTION
It is conceived for data-entering (data/character) during the configuration process, PIN entering (programmer or
user) etc. By touching or exerting a slight pressure on the area corresponding to the desired number, it allows to
enter alphanumeric characters (letters and symbols) in addition to 0-9 numbers , depending on the
operating context (menu). This is possible because the keypad is provided with the c mobile phone mode
technology, which allows to change the entered character depending on the settings (refer to the following key-
characters match chart).
Two ways to move forward the display line are possible while entering a text: using
another key or avoiding touching any key for 3 seconds after the last type.
Key-characters match chart:
KEY
FONT:
0 ( ) / % - _ # *
1 “ “ ‘space’ ? ! , . \ ‘ &
A B C a b c 2 $ @
D E F d e f 3 ; <
G H I g h i 4 = >
J K L j k l 5 [ ]
M N O m n o 6 { :
P Q R S p q r s 7
T U V t u v 8 + }
W X Y Z w x y z 9
