EN
5
INTRODUCTION
We are very glad for your purchase. The security barrier
interdictio series, due to
their small form factor, are particularly suitable for doors and windows protec-
tion; high quality materials and improved technology make these barriers ap
-
propriate also in outdoor. The
interdictio
barrier is managed by a Microprocessor
Which control all the principal functions and handles the
optical synchronism.
The software allows the barrier to work in 3 different ways, in practice summarize
the various installation needs.
Direct rays, Crossed rays
or
AND
function of two
ADJACENT
rays. with a screwdriver you make a short circuit between the two
tinned points on
receiver barrier, and you get in a quick and easy way, the
desired operation.
From factory the barriers are preprogrammed as follows.
2 to 4 Rays Mode 1 (1 Ray Alarm)
4 to 8 rays Mode 2 (2 Rays Alarm)
TECHNICAL DATA
Optical Range: 0,5 ÷ 4 m
Number rays for Alarm: 1 o 2 Adjacent
Nr. direct rays/cross: 2 … 8 / (4 ..22)
Minimum Distance to Intersection 0,5 m
Time spent: 120 o 240 mSec.
Recovery Time: 1 Sec.
Supply: 12 Volt (10÷16) Vcc - 30 mA (6 rays)
Barrier Outputs: N.C. ALARM (only Rx) e N.C. TAMPER
Contact range: 24 Vcc - 0.5 A
Operating Temperature Range: (-15/+60) °C
Protection grade: IP 44
Profile Dimensions: 17.5 x 14 mm (Width x Thickness)
Cover cap Dimensions: 100 x 24 x 20 mm. (L x W x H)
17,5 mm
14 mm
24 mm
22 mm
90 mm
500 - 100 0 - 1500 - 2000 - 2500 mm
