- Page 2 -
Tiffany Counterstool
Assembly Instructions
STK #86577, #86578
Attach front legs F/G onto seat A
Insert the cross bar E onto
the front legs F/G
Insert the cross bars C/D onto
the backrest B
Put the seat A and front legs F/G
onto the leaning back B and side
cross bar C/D. Press the end of the
side cross bar C/D into the front
legs F/G. Make sure the hole on
seat A align with the hole of
leaning back B
Tighten the front legs F/G to the
seat A with bolts 1, spring washers
3 & 4 using Allen Key 5, then
attached the seat A to leaning
back B with bolts 6 , spring
washers 3 & 4 using Allen Key 5.
Do not fully tighten front legs F/G
to the seat A in this assembly step.
Tighten the side cross bar C/D to the
leaning back B and the front legs F/G
with screws 2 using screw driver.
Tighten the front cross bar E to the
front legs F/G with screws 2 using
screw driver.
Then fully tighen the front legs on the
step 5.
