9
2-4
UPS start up and turn off
Start up operation
(1)TurnontheUPSinlinemode
NOTE
Verify that the total equipment ratings do not exceed the UPS
capacitytopreventanoverloadalarm.
a)
Oncemainspowerispluggedin,theUPSwillchargethebattery,atthemoment,
theLCDshowsthattheoutputvoltageis220,whichmeanstheUPSautomatically
tarttheinverter.Ifitisexpectedtochangetobypass
model,youcanPress“OFF”
key.
b)
PressandholdtheONkeyformorethan
three
secondstostarttheUPS,thenitwill
starttheinverter.
c)
Oncestarted,theUPSwillperformaself-testfunction,LEDwilllightandgoout
circularly and orderly. When the self-test finishes, it will come to line mode, the
correspondingLEDlights,theUPSisworkinginlinemode.
(2)TurnontheUPSbyDCwithoutmainspower
a)
Whenmainspowerisdisconnected,pressandholdtheONkeyformorethanhalfa
secondtostartUPS.
b)
TheoperationoftheUPSintheprocessofstartisalmostthesameasthatwhen
mainspowerisin.Afterfinishingtheself-test,thecorrespondingLEDlightsandthe
UPSisworkinginbatterymode.
Turn off operation
(1)
TurnofftheUPSinlinemode
a)
Press andhold theOFF key for more than half a second to turnofftheUPS and
inverter.
b)
After the UPS shutdown, the LEDs go out and there is no output. If output is
needed,youcansetbps“ON”ontheLCDsettingmenu.
(1)
TurnofftheUPSbyDCwithoutmainspower
a)
PressandholdtheOFFkeyformorethanhalfasecondtoturnofftheUPS.
b)
WhenturningofftheUPS,itwilldoself-testingfirstly.TheLEDslightandgoout
circularlyandorderlyuntilthereisnodisplayonthecover.
Operation and Display Panel
Theoperationanddisplaypanel,showninbelowchart,isonthefrontpanelofthe
inverter.Itincludesthreeindicators,fourfunctionkeysandaLCDdisplay,indicatingthe
operatingstatusandinput/outputpowerinformation.