background image

Brute winche
comply with this Directive through the Harmonized European Standard EN1496 Class A [AFT730020 & AFT730040].

1.

PERFORMANCE AND LIMITATIONS OF USE:

These Winches have been tested in accordance with EN 1496:2017 and have achieved the following performance levels:

s are classed as rescue lifting devices by the European Machinery Directive 2006/42/EC and have been shown to 

EN 1496:2017 test

RESULT/COMMENT

4.2 Ergonomics 

Force applied to handle to lift 136Kg is 140kN

4.3 Material & constructions

No sharp edges or burrs that could add additional risk to user

4.5 Dynamic Performance 
& function test for class B

136 Kg mass held, Peak Arrest force : 3.0 kN, Arrest
distance : 2.17m following Dynamic performance, 
204Kg & 30Kg could be raised and lowered on lifting 
device. On release of handle the arrest distance : 0mm

4.6 Static strength 

13.4kN sustained for 3 mins without failure 

4.7 Corrosion Resistance 

Corrosion test in accordance with ISO 9227:2012, 
48 Hrs (Pass)

Please read and understand the manufacturer's instructions for each component or part of the complete system. Manufacturer's instructions 

must be followed for proper use, care, and maintenance of this product. These instructions must be retained and be kept available for the user's 
reference at all times. Alterations or misuse of this product, or failure to follow instructions, may result in serious injury or death.

Note:

 The user is advised to keep this user instructions document for the life of the product.

Winch :

Ÿ

To be used for raising or lowering of a person or material into confined spaces.

Ÿ

Comes with pre-installed mounting plate compatible with the mounting bracket fixed 
on the leg of the Tripod and can also be fitted to Extreme Davit Systems.

Ÿ

Maximum lifting load capacity as per EN 1496:140 kgs as per machinery directive 
2006/42/EC:250 kgs

Ÿ

Consists of Screw Locking Karabiner (AFC601100) as a Connector.

Ÿ

Conforms to EN 1496:2017 (Class A).

Ÿ

Must be used with a Retractable Fall Arrest Block when using as a Personal Winch 
raising or lowering.

Ÿ

Comes with Galvanized Steel wire rope of dia 4.5mm.

Ÿ

Also available with the Stainless Steel Wire.

2.

TECHNICAL SPECIFICATIONS:

01

Ref No.

Length

AFT730020

20m

Summary of Contents for AFT730020









Reviews: