KTI Networks KS-324F, Installation Manual

C.  Compliances

EMI Certification

FCC Class A Certification (USA)

Warning: This equipment generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the instruction manual, may 
cause interference to radio communications.  It has been tested and found to 
comply with the limits for a Class A digital device pursuant to Subpart B of Part 
15 of FCC Rules, which are designed to provide reasonable protection against 
such interference when operated in a commercial environment.  Operation of 
this equipment in a residential area is likely to cause interference, in which case 
the user, at his own expense, will be required to take whatever measures are 
required to correct the interference. 

Canada Department of Communications - Class A

This digital apparatus does not exceed the Class A limits for radio noise 
emissions from digital apparatus as set out in the interference-causing equipment 
standard entitled "Digital Apparatus", ICES-003 of the Department of 
Communications.

CE Mark Declaration of Conformance for EMI and Safety (EEC)

This is to certify that this product complies with ISO/IEC Guide 22 and 
EN45014.   
It conforms to the following specifications:

EMC:   EN55022(1988)/CISPR-22(1985)    class A 
             EN60555-2(1995)                            class A 
             EN60555-3 
             IEC1000-4-2(1995)                          4kV CD, 8kV AD 
             IEC1000-4-3(1995)                          3V/m  
             IEC1000-4-4(1995)                          1kV  - (power line), 0.5kV  - (signal 
line) 

This product complies with the requirements of the Low Volt age Directive 
73/23/EEC and the EMC Directive 89/336/EEC.  

Warning!

  Do not plug a phone jack connector in the RJ-45 port.  This may 

damage this device.