11g Wireless Security Router User Guide
- 18 -
of minutes you wish the network to remain idle before
disconnection occurs in the “
Max Idle Time”
location.
Keep Alive:
This function keeps your PPPoE connection enable even
if it remains idle. However, in some situation, PPPoE
session cannot be established immediately after
disconnection. This is because the system on the ISP’s
site may need a little time to restore itself. You may need
to check with your ISP to obtain detail of how long you
need to wait before re-establish the PPPoE session. Enter
this information in the “
Redial Period
” field.
RAS(for SingTel)
If your ISP uses RAS to establish the connection, you should select this item and follow
the steps below.
User Name:
Enter the user name your ISP provides you.
Password:
Enter the password your ISP provides you.
RAS Plan:
Choose the connection method that you want to use.
Connect-on-demand:
It
is
a utility used to trigger the RAS session when there is
a packet being sent through the WAN port while it is on
disconnected situation. Check the radio button to make
this function active, and then you must enter the number
of minutes you wish the network to remain idle before
disconnection occurs in the “
Max Idle Time”
location.
Keep Alive:
This function keeps your RAS connection enable even if
it remains idle. However, in some situation, RAS session
cannot be established immediately after disconnection.
This is because the system on the ISP’s site may need a
little time to restore itself. You may need to check with
your ISP to obtain detail of how long you need to wait
before re-establish the RAS session. Enter this
information in the “
Redial Period
” field.
