11g Wireless Security Router User Guide
- 24 -
remain in the
IP
and
Mask
fields.
(2)
IP Address
Selecting this item allows only the specific PC with the IP
address you enter in the IP field to the tunnel.
Only the PC with IP Address 192.168.2.51 can access the
tunnel from the other end.
(3)
IP Range
Selecting this item allows a specific group of PCs access to
the tunnel.
PCs with IP Address between 192.168.2.2 and
192.168.2.100 can access the tunnel from the other end.
(4)
Host
If you select “Host”, the value set here should be the same as
the Remote Security Gateway setting.
(5)
Any
When this option is selected, the Router accepts remote
requests from any IP address, such as mobile users or
telecommunications device using dynamic IP address. Note
that the router cannot initial VPN connection when “Any” is
selected as Remote Security Group.
Remote Security
Gateway:
Define the end point of VPN tunnel in the other side. The
remote VPN tunnel end point can be another VPN Router, a
VPN Server, or a host with VPN software. For example, if the
VPN device at the other end of the tunnel is a VPN router, enter
the WAN IP Address of that VPN router in this section. For
more detail, refer to the description of “
Example - establish
the VPN connection”
on next few pages.
(1)
IP Address
Use IP Address to identify the remote VPN tunnel end point.
(2)
FQDN
Use domain name to identify the remote VPN tunnel end
point.
