11g Wireless Security Router User Guide
- 38 -
UPnP Function:
Check “
Enable
” will allow LAN side PCs that support UPnP
to set virtual server.
Before you enable the UPnP Forwarding, you have to set up
individual network computers to act as servers and configure
each with a fixed IP Address.
In the “One Page Setup” screen, ensure the
“Private IP
Address”
is set to the Router’s default setting of 192.168.1.1.
If a fixed Public IP Address is to be used, select “
Specify an
IP address”
and enter the IP Address and other necessary
information provided by your ISP.
UPnP Control:
Application Name
UPnP has ten pre-setting forwarding rules, which are
well-known applications. You can enter any name to present
the additional settings beside those pre-setting rules.