ENGLISH
6
10
7
6
9
5
5
5
8
1
4
4
7
2
3
1
1
- Insert the new gasket (included) into the main silencer (included).
- Insert the bushings
(1)
(included) on both sides of the tab.
Carefully push the main silencer onto the manifold.
- Mount the main silencer using the M8x35 screw
(2)
and M8 thin nut
(3)
.
NOTE:
Do not tighten the screws yet.
- Grease the original screws
(4)
with copper paste and mount them.
- Position the entire system so it is tension-free and tighten the screws.
NOTE:
Repeat the same procedure for the second main silencer.
- Mount the seat
(10)
(see the owner's manual).
Spare parts:
Noise damping insert
60005099020
Rock wool kit
60005099010
- Position both racks and mount them using the original screws.
- Position the top case plate
(7)
and mount it using the original screws
(8)
and
(9)
.
- Position the side parts and mount them on the left and right using screws
(5)
and
(6)
.
