KTM Power Parts 61407947000, Information

5

ENGLISH

Scope of supply

1x heatable passenger seat, complete 

1x holder for heater switch 

                                        61408019060

1x heater switch 

                                                         60411041000

1x lock nut 

NOTE
The heated front rider’s seat (61407940000) is needed for the pas-
senger seat function.

Preliminary work

- Take off the passenger seat (see the Owner’s Manual).
- Take off the front rider’s seat (see the Owner’s Manual).

Preassembly

- Mount heater switch 

 in holder 

 (both included) (see Fig., 

  switch setting 0).

- Mount lock nut 

 (included) and tighten.

Assembly

- Remove screws 

.

- Pull out activated charcoal 

fi

 lter 

 and lay to the side.

- Slip out wiring harness for passenger seat heating 

 and expose.

NOTE

The wiring harness 

 is attached to the main wiring harness using 

cable ties. Remove this beforehand and secure the remaining cable 
again using cable ties.

- Slip out wiring harness for heater switch 

 (small white connector)

  and expose.

  The seat heating function must be

           activated following mounting using the KTM diagnostics
           tool. Have this work performed in an authorized KTM 
           workshop.