0
0
0
B
B
30/ENGINE - WORK ON INDIVIDUAL PARTS
117
–
Check springs
of the shift rails for damage and wear.
» If the spring is broken or worn:
–
Change the spring of the shift rail.
–
On a flat surface, check shift rail
for run-out.
» If there is run-out:
–
Change the shift rail.
–
Check shift rail
for grooving, signs of corrosion and smooth operation in shift fork
.
» The shift rail has grooving or signs of corrosion or is not smooth in operation in the shift fork:
–
Change the shift rail.
–
Preassemble the shift shaft. (
400372-10
–
Check clearance
between the sliding plate and shift quadrant.
Shift shaft - play in sliding plate/shift
quadrant
0.40… 0.80
mm (0.0157…
0.0315
in)
» If the measured value does not equal the specified value:
–
Change the sliding plate.
19.30
Disassembling the shift shaft
600288-10
–
Fix the short end of the shift shaft in a vise.
Specification
Use soft jaws.
–
Detach spring
and remove it.
600289-10
–
Remove spring guide
and pressure spring
.
600290-10
–
Remove sliding plate
.
