9
SERVICE SCHEDULE
71
Every 15,000 km (9,321 mi) or every 2 years
Every 7,500 km (4,660 mi) or annually
Once after 1,000 km (621.4 mi)
Check the valve clearance.
x
○
●
Check all hoses (e.g. fuel, cooling, bleeder, drainage, etc.) and bellows for cracking, leaks, and correct routing.
x
○
●
●
Check the antifreeze and coolant level. (
○
●
●
Check the cables for damage and routing without sharp bends.
x
●
●
Check that the throttle cables are undamaged, routed without sharp bends, and set correctly.
x
○
●
●
Change the air filter. Clean the air filter box.
x
●
●
Check the screws and nuts for tightness.
x
○
●
●
Change the front brake fluid.
x
●
Change the rear brake fluid.
x
●
Check the headlight setting. (
○
●
●
Check that the radiator fan is functioning properly.
x
○
●
●
Final check: Check the vehicle for roadworthiness and take a test ride.
○
●
●
Read out the fault memory using the KTM diagnostics tool after a test ride.
x
○
●
●
Make the service entry in
KTM DEALER.NET
and in the service record.
x
○
●
●
○
One-time interval
●
Periodic interval
Summary of Contents for 2015 200 Duke
