30/DISASSEMBLING THE ENGINE
129
19.29
Removing the timing chain
305019-10
–
Remove screws
1
.
–
Remove the timing chain tensioning rail
2
.
–
Remove the timing chain guide rail
3
.
305020-10
–
Remove screw
4
.
–
Take off balancer shaft
5
with the timing chain and timing chain securing guide.
Info
If the timing chain is going to be used again, mark its direction of travel.
19.30
Removing the spacer
305021-10
–
Remove spacer
1
of the crankshaft.
19.31
Removing the left section of the engine case
305022-10
–
Remove screws
1
.
–
Tilt the left section of the engine case upward and remove the screw connections of
the engine fixing arm.
302681-10
–
Insert the special tool into the crankshaft.
Protection cover (75029090000) (
–
Mount special tool
2
with the appropriate screws.
Puller (77229048000) (
Info
Use the drill hole marked with
772
.
–
Take off the section of the engine case.
Info
Do not subject the section of the engine case to any stress.
The washer of the main shaft usually adheres to the bearing.