30/ENGINE - WORK ON THE INDIVIDUAL PARTS
150
–
Change the spring retainer.
–
Check the pretension ring
4
for damage and wear.
» If there is damage or wear:
–
Change the pretension ring.
–
Check spring washer
5
for damage and wear.
» If there is damage or wear:
–
Change the spring washer.
–
Check the thrust face of pressure cap
6
for damage and wear.
» If there is damage or wear:
–
Change the pressure cap.
–
Check clutch center
7
for damage and wear.
» If there is damage or wear:
–
Change the clutch center.
–
Check damping rubber
8
for damage and wear.
» If there is damage or wear:
–
Change the damping rubbers.
–
Check the inner clutch hub
9
for damage and wear.
» If there is damage or wear:
–
Change the inner clutch hub.
–
Check the contact surfaces of the clutch facing disks in outer clutch hub
bk
for damage and wear.
» If there is damage or wear:
–
Change the clutch facing discs and the outer clutch hub.
–
Check needle bearing
bl
and collar sleeve
bm
for damage and wear.
» If there is damage or wear:
–
Change the needle bearing and collar sleeve.
–
Check the intermediate clutch discs
bn
for damage and wear.
» If the intermediate discs are not flat or have punctiform outbreaks:
–
Change all intermediate discs.
–
Check clutch facing discs
bo
for discoloration and scoring.
» If there is discoloration or scoring:
–
Change all clutch facing discs.
–
Check the thickness of clutch facing discs
bo
.
Clutch facing discs - thickness of total package
≥
26.4 mm (
≥
1.039 in)
» If the clutch facing disc does not meet specifications:
–
Change all clutch facing discs.