6
FORK, TRIPLE CLAMP
46
–
Position sleeve
in the reservoir.
201796-10
–
Clamp the tube of the cartridge into a vise.
Clamping stand (T14049S) (
–
Slide reservoir
onto the tube.
Info
Hold the sleeve in the reservoir to prevent it from sliding out.
–
Mount lock ring
.
202481-11
–
Mount seal ring retainer
with the washer and tighten.
Guideline
Seal ring retainer
M23.5x0.75
46 Nm
(33.9 lbf ft)
Loctite
®
2701™
–
Unclamp the cartridge.
201797-10
–
Slide piston rod
into the cartridge.
Info
Ensure that the piston ring is seated correctly.
–
Mount spring seat
.
202480-11
–
Degrease piston rod
and clamp in the vise.
Clamping stand (T14049S) (
–
Screw spring guide
all the way on.
Info
The nut must be firmly tightened against the stop by hand. Do not use a
tool.
–
Mount adjusting tube
.
–
Unclamp the piston rod. Mount the preload spacer(s).
6.13.13 Assembling the fork legs
Info
When assembling, ensure that the right cartridge is mounted in the corresponding inner tube and the right adjuster is mounted
on the corresponding screw cap.
Compression damping side
–
screw cap with mark
COMP
, brake caliper holder, white adjuster.
Rebound damping side
–
screw cap with mark
REB
, no brake caliper holder, red adjuster.
Preparatory work
–
Assemble the hydrostop unit. (
201714-10
Main work
–
Clamp the inner tube with the axle clamp.
Guideline
Use soft jaws.
–
Mount special tool.
Protecting sleeve (T1401) (
Summary of Contents for 350 EXC-F SIX DAYS EU
Page 2: ......
Page 235: ...233 ...