10
TUNING THE CHASSIS
34
10.15
Adjusting the handlebar position
x
B00375-10
–
Remove the four screws
1
. Remove the handlebar clamp. Remove the handlebar
and lay it to one side.
Info
Protect the motorcycle and its attachments against damage by covering
them.
Do not bend the cables and lines.
–
Remove screws
2
. Remove the handlebar supports.
–
Place the handlebar supports in the required position. Mount and tighten
screws
2
.
Guideline
Screw, handlebar support
M10
40 Nm
(29.5 lbf ft)
Loctite
®
243™
Info
Position the left and right handlebar supports evenly.
–
Position the handlebar.
Info
Make sure cables and wiring are positioned correctly.
–
Position the handlebar clamps. Fit and evenly tighten the four screws
1
.
Guideline
Screw, handlebar clamp
M8
20 Nm
(14.8 lbf ft)