11
SERVICE WORK ON THE CHASSIS
49
B01427-11
–
Lower the swingarm.
B01473-11
–
Position the angle lever and linkage lever.
–
Mount and tighten screw connection
4
.
Guideline
Nut, linkage lever to angle lever
M14x1.5
80 Nm (59 lbf ft)
–
Mount and tighten screw
5
.
Guideline
Screw, bottom shock
absorber
M10
60 Nm
(44.3 lbf ft)
Loctite
®
2701™
Finishing work
–
Install the main silencer. (
–
Remove the motorcycle from the lift stand. (
11.33
Removing the main silencer
Warning
Danger of burns
The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
B01429-10
–
Disconnect spring
1
.
Spring hooks (50305017000)
–
Remove screws
2
and take off the main silencer.
11.34
Installing the main silencer
B01429-11
–
Position the main silencer.
–
Mount screws
1
but do not tighten yet.
–
Reconnect spring
2
.
Spring hooks (50305017000)
–
Tighten screws
1
.
Guideline
Remaining screws, chassis
M6
10 Nm (7.4 lbf ft)