19
LUBRICATION SYSTEM
153
308271-10
–
Remove oil filter
2
.
Circlip pliers reverse (51012011000) (
p. 189)
308272-10
–
Position the special tool with the O-ring. Mount and tighten the screws.
Guideline
Screw, oil filter cover
M5
8 Nm (5.9 lbf ft)
Oil pressure adapter (75029094000) (
p. 192)
–
Connect the pressure tester to the special tool without the T-plate.
Pressure testing tool (61029094000) (
p. 191)
–
Check the engine oil level. (
p. 152)
Danger
Danger of poisoning
Exhaust gases are toxic and inhaling them may result
in unconsciousness and/or death.
–
When running the engine, always make sure there is sufficient ventila-
tion, and do not start or run the engine in an enclosed space without an
effective exhaust extraction system.
–
Start the engine.
–
Check the engine oil pressure.
Engine oil pressure
Coolant temperature:
≥
70 °C
(
≥
158 °F)
Engine speed: 1,500 rpm
≥
0.7 bar (
≥
10 psi)
Coolant temperature:
≥
70 °C
(
≥
158 °F)
Engine speed: 5,000 rpm
≥
2.4 bar (
≥
35 psi)
» If the specification is not reached:
–
Check oil pumps for wear. Check all oil channels for free flow.
–
Switch off the engine.
Warning
Danger of burns
Some vehicle components get very hot when the machine
is driven.
–
Wear appropriate protective clothing and safety gloves. In case of burns,
rinse immediately with lukewarm water.
–
Remove the special tools.
–
Insert the new oil filter.
–
Oil the O-ring of the oil filter cover. Mount the oil filter cover.
–
Mount and tighten the screws.
Guideline
Screw, oil filter cover
M5
8 Nm (5.9 lbf ft)
Finishing work
–
Check the engine oil level. (
p. 152)
