WORK
5
3.3
Mounting the seat
100046-10
–
Hook slot
on the seat into collar sleeve
of the fuel tank, lower the rear of the
seat and slide tab
under fuel tank
.
100043-10
–
Push down the rear of the seat until release hook
engages.
–
Make sure that the seat is correctly locked in.
3.4
Removing the rear fender
–
Remove the seat (
300254-10
–
Remove screws
.
300255-10
–
Raise the rear of the air filter box lid
. At the same time, use your other hand to
press on the carburetor connection boot to kink it at that location. This prevents the
carburetor connection boot from disconnecting from the carburetor.
–
Raise fender
at the rear and remove it.
