SERVICE WORK ON THE CHASSIS 11
55
11.19
Installing the shock absorber
A00044-11
Main work
–
Push splash protector
1
to the side and position the shock
absorber. Mount and tighten screw
2
.
Guideline
Screw, top
shock absorber
M12
60 Nm (44.3 lbf ft)
Loctite
®
2701™
–
Mount and tighten screw
3
.
Guideline
Screw, bottom
shock absorber
M12
60 Nm (44.3 lbf ft)
Loctite
®
2701™
–
Attach brake line.
Finishing work
–
Remove the motorcycle from the lift stand. (
11.20
Removing the seat
V00836-10
–
Remove screw
1
.
–
Raise the rear of the seat, pull the seat back, and lift it off.
11.21
Mounting the seat
V00837-01
–
Mount the front of the seat on the collar bushing of the fuel
tank, lower the seat at the rear, and push the seat forward.
–
Make sure that the seat is correctly locked in.
V00836-10
–
Mount and tighten screw
1
of the seat fixing.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
Summary of Contents for 85 SX 17/14 2021
Page 1: ...OWNER S MANUAL 2021 85 SX Art no 3214206en ...
Page 2: ......