WHEELS, TIRES 14
77
–
Mount the damping rubber and rear sprocket carrier on the
rear wheel.
–
Insert the spacers.
–
Position the rear wheel.
The brake linings are correctly positioned.
–
Push the rear wheel forward as far as possible and lay the
chain on the rear sprocket.
–
Position the chain guard.
F00861-12
–
Pull the rear wheel back and mount wheel spindle
3
with the
washer and chain adjuster
4
.
Guideline
Mount left and right chain adjusters
4
in the same posi-
tion.
–
Mount nut
2
and the washer.
–
Push the rear wheel forward so that the chain adjusters are in
contact with the screws, and tighten nut
2
.
Guideline
In order for the rear wheel to be correctly aligned, the mark-
ings on the left and right chain adjusters must be in the
same position relative to reference markings
B
.
Nut, rear wheel spin-
dle
M14x1.5
98 Nm (72.3 lbf ft)
–
Position wheel speed sensor
5
in the hole.
–
Mount and tighten screw
6
.
Guideline
Screw, wheel speed
sensor holder
M6
8 Nm (5.9 lbf ft)
F00865-11
–
Mount and tighten screw
7
.
Guideline
Screw, chain guard
EJOT PT
®
K60x30
7 Nm (5.2 lbf ft)
Finishing work
–
Remove the rear of the motorcycle from the lifting gear.
(
–
Check the chain tension. (
Summary of Contents for F4303U1
Page 1: ...OWNER S MANUAL 2021 390 DUKE Art no 3214321en ...
Page 2: ......
