Status of the battery
charging level indicator
on the battery
Remaining capacity of the
battery (%)
Status of the
battery charging
level indicator on
the LCD control
panel
Status of the
battery charging
level indicator on
the LED control
panel
All 3 LEDs light red
approximately:
100-70%
2 LEDs light red
approximately:
70-40%
1 LED lights red
approximately:
40-10%
Slow blinking
approximately:
10-0%
Fast blinking off
→
Battery charging level indicator
Button for battery charging
level
Battery charging level
indicator
approximately: 100 - 80%
approximately: 80 - 60%
approximately: 60 - 40%
approximately: 40 - 20%
4 LEDs
light red
3 LEDs
light red
2 LEDs
light red
1 LED
lights red
1 LED
blinks red
approximately: 20 - 10%
approximately: 10 -0%
Page 10
ATTENTION
In the following cases, the LEDs on the battery charge
indicator light up, but the system does not support it:
- The battery is new
- It has not been used for a long time
– It is used on a cold day
– When approaching a steep hill
In this case, you have to charge the battery again.
Drive mode
The drive system works in three levels of support in the Drive mode. They will be supported by
the drive system automatically, without any operation of an accelerator. A torque sensor is
located in the axis of the pedal bearing and it measures the force applied by the driver.
According to the measured force, the power of the supporting electric motor will be regulated
accordingly.
Support step (gear) (A)
Support level
Driving situation
1
50%
Driving on the flat
2 120%
Gradients,
headwinds
3 200%
Steep hills,
strong headwind
Expected maximum range
The maximum range of the battery depends greatly on various factors such as the selected
level of support, the road surface, weight of the rider, tyre pressure and ambient
temperature. The following are the maximum performance characteristics possible:
Battery 36 V / 14 Ah
Battery 36 V / 12 Ah
Battery 25 V / 12 Ah
Page 11
