- 6 -
Remarks:In the custom mode, the other three function keys are invalid, and the red indicator
light corresponding to the click key flashes.
▲
Other functions:
1.Need wide voltage stabilization function.
2. The three function keys must have interlocking function.
3. When the knob is plugged into the plug at the non-zero position and
the voltage is turned on, the motor cannot work. It can only work by
turning the knob to the "OFF" position.
USING THE KNIFE BLADE
These 2 knife blades (Item No.8
Plastic Knife Blade and item No. 7 Stainless Steel Knife Blade
) could be the
most versatile of all the attachments. The length of the processing time is different base on different food.
For coarser textures use the pulse control.
Use these 2 knife blades for cake and pastry making, chopping raw and cooked meat, vegetables, nuts,
pate, dips, pureeing soups and to also make crumbs from biscuits and bread.
▲
For
Stainless Steel Knife Blade
: Not allowed to continuously use more than 1 minutes, Should cool
down the motor before next operation.
▲
Before processed, please cut the meat into 3 X 3 cm Size. Never put more than 500g such meat into
the container. After 1 minute, the meat will be processed finely.
▲
For
Plastic Knife Blade
: Not allowed to continuously use more than 1 minutes, Should cool down the
motor before next operation. The Max dough could be
used is 250g dough with 175g water.
▲
Do not use the Stainless Steel Knife Blade for mixing
flour.
▲
Plastic Knife Blade could for mixing flour, not more
than 1 minutes. Should cool down the motor before
next operation.
* Always put the blade in the bowl before you start to add
the ingredients.
* If you chop onions, use the pulse function a few times to
prevent the onions into too finely chopped.
* Do not let the appliance run too long when you chop
(hard) cheese or chocolate. Otherwise these ingredients
become too hot, start to melt and turn lumpy.
Operation:
·
Follow the flows as picture in right side one step by one step to assemble components into machine.
·
Sure the bowl in step 2 and lid in step 4.Is locked well or the machine will not work.
·
After operation, you could disassemble 2 kinds.Blades from drive shaft B for clean in opposition against
