BoWex-ELASTIC
®
Operating/Assembly instructions
Type HEW, HEW Compact and HEW-ZS
KTR-N
Sheet:
Edition:
40114 EN
9 of 24
9
Please observe protection
note ISO 16016.
Drawn:
2019-11-06 Pz
Replacing:
KTR-N dated 2019-08-13
Verified:
2019-11-06 Pz
Replaced by:
The coupling hubs are supplied in preserved condition and can be stored at a dry and roofed place for 6 - 9
months.
With favourable storage conditions the properties of the elastomer part remain unchanged up to 5 years.
!
The storage rooms must not include any ozone-generating devices like e. g. fluorescent
light sources, mercury-vapour lamps or electrical high-voltage appliances.
Humid storage rooms are not suitable.
Please make sure that condensation is not generated. The best relative air humidity is less
than 65 %.
!
In order to avoid any injuries and any kind of damage always make use of proper transport
and lifting equipment.
The couplings are packed differently each depending on size, number and kind of transport. Unless otherwise
contractually agreed, packaging will follow the in-house packaging specifications of KTR.
The coupling is generally supplied in individual parts. Before assembly the coupling has to be inspected for
completeness.
Components of BoWex-ELASTIC
®
type HEW1 and HEW2
Component
Number
Description
1
1
Elastomer part
2
1
Hub
4
1
Coupling flange
5
see table 1
1)
Cap screw DIN EN ISO 4762
1)
7
2
Setscrew DIN EN ISO 4029
1) With size 150 nuts as per DIN EN ISO 4014 are required additionally.
Illustration 7: BoWex-ELASTIC
®
type HEW1
Illustration 8: BoWex-ELASTIC
®
type HEW2
3
Storage, transport and packaging
3.1 Storage
3.2 Transport and packaging
4
Assembly
4.1 Components of the couplings
