KTR Kupplungstechnik
GmbH
D-48407 Rheine
B o W e x - E L A S T I C
®
Operating-/Assembly Instructions
Design 065 (HEW1 and HEW2)
KTR-N
sheet:
edition:
40114 E
4
4
Gezeichnet:
08.04.04 Sha/Hk
Ersatz für:
KTR-N vom 01.12.99
Schutzvermerk
ISO 16016 beachten.
Geprüft:
08.04.04 Sha
Ersetzt durch:
2 Hints
2.4 Proper Use
You may only assemble, operate and maintain the coupling if you
•
carefully read through the mounting instructions and understood them
•
had technical training
•
are authorized to do so by your company
The coupling may only be used in accordance with the technical data (see table 1 and 2 in chapter 1).
Unauthorized modifications on the coupling design are not admissible. We do not take any warranty for resulting
damages. To further develop the product we reserve the right for technical modifications.
The
BoWex-ELASTIC
®
Bauart HEW
described in here corresponds to the technical status at the time of printing
of these mounting instructions.
3 Storage
The coupling hubs are supplied in preserved condition and can be stored at a dry and roofed place for 6 - 9
months.
The features of the elastomer part remain unchanged for up to 5 years in case of favourable stock conditions.
!
C A U T I O N !
The storage rooms may not include any ozone-generating devices, like e. g. fluorescent light
sources, mercury-vapour lamps or electrical high-voltage appliances.
Humid storage rooms are not suitable.
Please make sure that there is no condensation. The best relative air humidity is under 65%.
4 Assembly
Basically the coupling is supplied in individual parts. Before assembly the coupling has to be controlled for
completeness.
4.1 Components of the Couplings
Component Quantity
Designation
Component Quantity
Designation
1
1
elastomer part
4
s. table 1 cap screw DIN 912
2 1
hub
5 2
setscrew DIN 916
3 1
coupling
flange
picture 3: BoWex-ELASTIC
®
design HEW1
picture 4: BoWex-ELASTIC
®
design HEW2