KTS-Electronic GmbH & Co. KG
– GPA 500
23
7.1 Back side
1.
Charger
(connection to the charging device / separate plug): For charging the
battery the plug of the charging device has to be plugged into the provided
connector socket. The maximum charging time is 90 minutes (to avoid a defect
on the charger or the built-in battery, please do not exceed this time). The
connector of the charger should be removed after each charge.
2.
Headphone socket:
Any commercial headphones with 6.3 mm jack can be
plugged in. During use the loudspeaker is turned off. Matching, light weight
headphones are provided.
3.
Socket for coils:
The connecting socket for coils is located on the left side. The
connector plug of the searchcoil has to be plugged into the socket. Before
removing the plug the locking knob must be pressed, only then an extraction is
possible. The connector is compatible with all GOLD ID-XL searchcoils.
8 Search process
Please note the following:
Stay away from conducting overhead lines
Do not use cell phone during operation
Do not process any measurement during thunderstorms
Protect device from wetness
Accurate operation is only guaranteed with a fully charged battery
For operation or charging only use the components enclosed or released by KTS
GmbH & Co. KG.
