Introduction
4/13/21
AP-PFL4648, AP-PFL5648, & AP-PFL5660 Loader Mounted Pallet Forks 319-227MK
8
The parts on your Loader Mounted Pallet Fork have been
specially designed by Kubota/Land Pride and should
only be replaced with genuine Kubota parts. Contact a
Kubota dealer if customer service or repair parts are
required. Your Kubota dealer has trained personnel,
repair parts, and equipment needed to service the
attachment.
Serial Number
For quick reference and prompt service, record model
and serial number on the inside cover page and again on
the warranty page. Always provide model number and
serial number when ordering parts and in all
correspondences with your Kubota dealer. For location of
your serial number plate, see Figure 1.
Serial Number Plate Location
Figure 1
Further Assistance
Your Kubota dealer wants you to be satisfied with your
new attachment. If for any reason you do not understand
any part of this manual or are not satisfied with the
service received, the following actions are suggested:
1. Discuss any problems you have with your attachment
with your dealership service personnel so they can
address the problem
2. If you are still not satisfied, seek out the owner or
general manager of the dealership, explain the
question/problem, and request assistance.
3. For further assistance write to:
Kubota by Land Pride
Service Department
1525 East North Street
P.O. Box 5060
Salina, KS 67402-5060
E-mail address
lpservicedept@landpride.com
74596
Introduction
Kubota welcomes you to the growing family of new
product owners. This pallet fork has been designed with
care and built by skilled workers using quality materials.
Proper assembly, maintenance, and safe operating
practices will help you get years of satisfactory use from
this attachment.
Application
The Kubota PFL4648, PFL5648, and PFL5660 pallet
forks have uses and applications in farming, ranching,
construction sites, nurseries, campuses, theme parks,
salvage operations, warehouses, lumber yards, and large
or small retail outlets. They have the capability of quickly
and conveniently turning your skid steer or track loader
into a forklift to expand your material handling capability.
They are available in two different weight lifting classes
(PFL46 Series at 4,500 lbs (2041 kg) and PFL56 Series
at 5,500 lbs (2495 kg) and two different fork lengths
48" (1.22 m) & 60" (1.52 m). Whichever model you select,
you’ll find that these Kubota attachments will save you
time and money and make getting that material handling
job done a whole lot easier.
For additional information and performance enhancing
options, see “
Specifications & Capacities
”
on page 18
and “
Features & Benefits
” on page 19.
Using This Manual
•
This Operator’s Manual is designed to help familiarize
you with safety, assembly, operation, adjustments,
troubleshooting, and maintenance. Read this manual
and follow the recommendations to help ensure safe
and efficient operation.
•
The information contained within this manual was
current at the time of printing. Some parts may change
slightly to assure you of the best performance.
•
To buy a new Operator’s or Parts Manual, contact your
authorized dealer. Manuals can also be downloaded,
free-of-charge, from our website at
www.landpride.com.
Terminology
“Right” or “Left” as used in this manual is determined by
the direction the operator faces while sitting looking
forward in the operator’s seat unless otherwise stated.
Definitions
Owner Assistance
The dealer should complete the Online Warranty
Registration at the time of purchase. This information is
necessary to provide you with quality customer service.
IMPORTANT:
A special point of information related
to the following topic. Kubota’s intention is this
information must be read & noted before continuing.
NOTE:
A special point of information that the
operator should be aware of before continuing.
