OPERATING THE TRACTOR
22
B
Clutch Pedal
To avoid personal injury:
A
Sudden release of the clutch may cause the
tractor to lunge in an unexpected manner.
The clutch is disengaged when the clutch pedal is fully
pressed down.
To help prevent premature clutch wear:
A
The clutch pedal must be quickly disengaged and
be slowly engaged.
A
Avoid operating the tractor with your foot resting on
the clutch pedal.
A
Select proper gear and engine speed depending
on the type of job.
B
Main Gear Shift Lever & Range Gear Shift
Lever (L-H)
The main gear shift lever pattern is in the form of an "H".
The range gear shift lever moves in the form of an "I" in 2
stages, "HIGH" and "LOW". By combination of using the
main gear shift lever and the range gear shift lever, 6
forward speeds and 2 reverse speeds are obtained.
A
To change speeds, press the clutch pedal completely
down and stop the tractor before attempting to
proceed with speed change.
A
When you stand up from the seat with the main gear
shift lever at engaged, the engine will stop regardless
of whether the machine is moving or not.
This is because the tractor is equipped with Operator
Presence Control system (OPC).
4. Raise the implement.
(See "HYDRAULIC UNIT" section)
(1) Hydraulic control lever
(A) "UP"
5. Depress the Clutch Pedal.
(1) Clutch pedal
6.
Selecting the Travel Speed.
(1) Main gear shift lever
(2) Range gear shift lever (Hi-Lo)
(A) "HIGH"
(B) "LOW"
(N) "NEUTRAL POSITION"
