38
HYDRAULIC UNIT
B
Hydraulic Control Unit Use Reference Chart
In order to handle the hydraulics properly, the operator must be familiar with the following. Though this information may not
be applicable to types of implements and soil conditions, it is useful for general conditions.
Implement
Soil condition
Top link
mounting holes
(1)Hydraulic
control lever
Gauge
Wheel
(1)Check
chains
Remarks
Moldboard plow
Light soil
Medium soil
heavy soil
(1) is standard.
(2) is used only
when there is
some obstacle
that prevents you
from using the
standard.
Hydraulic control
YES/NO
Loose
Adjust the check
chains so that the
implement can
move 5 to 6cm
laterally.
For implements
with gauge wheels,
lower the
implements to the
ground.
Disc plow
---
Harrower (spike,
springtooth, disc
type)
---
Sub-soiler....
Weeder ridger..
---
YES
Tighten
Check chains
should be tight
enough to prevent
excessive
implement
movement when
implement is in
raised position.
For implements
with gauge wheels,
lower the
implements to the
ground.
Earthmover,
digger, scraper,
manure fork, rear
carrier....
YES/NO
Mower (mid-and
rear-mount type),
hayrake,
tedder....
