ENGINE
GL6000A-AU-B, GL6000D-AU-B,GL9000A-AU-B, GL9000D-AU-B, WSM
1-S27
Separating Engine and Generator
1. Disconnect the stator cables (10).
2. Remove the air cleaner (6), muffler (4) and radiator hoses (5).
3. Loosen the fan cover (7) mounting screws.
4. Disconnect the connectors (1).
5. Remove the bush holder (2).
6. Remove the generator mounting nuts.
7. Loosen the engine mounting nuts.
8. Lift up the engine and remove the generator from generator
fixed bolt (11).
9. Remove the rear bracket (3), stator (9), front bracket (8) and
rotor (12).
[GL6000A-AU-B, GL6000D-AU-B]
[GL9000A-AU-B, GL9000D-AU-B]
9Y1211607ENS0036US0
Engine
1. 1. Remove the oil drain hose (2).
2. 2. Remove the engine mounting nuts.
3. 3. Remove the engine (1).
9Y1211607ENS0037US0
Tightening torque
Generator mounting nut
20 to 27 N·m
2.0 to 2.8 kgf·m
15 to 20 lbf·ft
Stator mounting screw
6 to 8 N·m
0.6 to 0.9 kgf·m
5 to 6 lbf·ft
Rotor assembly mounting
screw
35 to 44 N·m
3.5 to 4.5 kgf·m
26 to 32 lbf·ft
PTO shaft
48 to 55 N·m
4.9 to 5.7 kgf·m
36 to 41 lbf·ft
Tightening torque
Generator mounting nut
54 to 68 N·m
5.5 to 7.0 kgf·m
40 to 50 lbf·ft
Stator mounting screw
19 to 21 N·m
1.9 to 2.2 kgf·m
14 to 15 lbf·ft
Rotor assembly mounting
screw
20 to 27 N·m
2.0 to 2.8 kgf·m
15 to 20 lbf·ft
Cooling fan mounting
screw
20 to 27 N·m
2.0 to 2.8 kgf·m
15 to 20 lbf·ft
(1) Connector
(2) Brush Holder
(3) Rear Bracket
(4) Muffler
(5) Radiator Hose
(6) Air Cleaner
(7) Fan Cover
(8) Front Bracket
(9) Stator
(10) Stator Cable
(11) Generator Fixed Bolt
(12) Rotor
Tightening torque
Engine
mounting
nut
GL6000A-AU
-B
GL6000D-AU
-B
20 to 27 N·m
2.0 to 2.8 kgf·m
15 to 20 lbf·ft
GL9000A-AU
-B
GL9000D-AU
-B
54 to 68 N·m
5.5 to 7.0 kgf·m
40 to 50 lbf·ft
(1) Engine
(2) Oil Drain Hose
KiSC issued 06, 2016 A