-
5
SAFE OPERATION
ENGLISH
24. Securely support the machine when changing wheels.
25. Make sure that wheel bolts have been tightened to the
specified torque.
26. Escaping hydraulic fluid under pressure has sufficient
force to penetrate the skin causing serious personal
injury. Before disconnecting lines, be sure to relieve all
pressure. Before applying pressure to the system,
make sure all connections are tight and that lines,
pipes, and hoses are not damaged.
27. Fluid escaping from pinholes may be invisible. Use a
piece of cardboard or wood to search for suspected
leaks: do not use hands. Use safety goggles or other
eye protection.
If injured by escaping fluid, see a medical doctor at
once. Serious infection or reaction will result if proper
medical treatment is not administered immediately.
This fluid can produce gangrene or severe allergic
reaction.
28.Waste products such as used oil, fuel, hydraulic fluid,
and batteries, can harm the environment, people, pets
and wildlife. Please dispose properly.
29.Do not use beverage containers for waste fluids or
other products. Someone, particularly children, may
drink them by mistake.
30.See your local Recycling Center or KUBOTA Dealer to
learn how to recycle or get rid of waste products.
A
A Material Safety Data Sheet (MSDS) provides
specific details on chemical products; physical and
health hazards, safety procedures, and emergency
response techniques. The seller of the chemical
products used with your machine is responsible for
providing the MSDS for that product upon request.
1. Keep the machine and supply of fuel in locked storage
and remove the key to prevent children or others from
playing or tampering with them.
2. When machine is to be stored for a long time,
disconnect battery cables or remove the battery.
Always remove the negative (-) cable first and reinstall
the negative (-) cable last.
3. Do not store the machine with fuel in the tank inside a
building where fumes may ignite. Allow the engine to
cool before storing.
4. To avoid the danger of exhaust fume poisoning, do not
operate the engine in a closed building without
adequate ventilation.
5. To reduce fire hazards, clean the machine thoroughly
before storage. Dry grass and leaves around the
engine and mufflers may ignite.
6. Moisture content in most grasses can damage the
mower and grass catcher if these components are not
properly cleaned after use. Also, dry grass and leaves
left in the container can be a fire hazard. Always make
sure the container and the duct are clean and
completely empty before storage.
(1) Cardboard
(2) Hydraulic line
(3) Magnifying glass
7. STORAGE
