13
OPERATING THE ENGINE
ENGLISH
B
Key Switch
A
Do not turn the key switch to the "START" position
while the engine is running.
A
When the temperature is below 0
, run the engine at
medium speed to warm up the lubricant of the engine
and the transmission for at least 10 minutes. If the
machine is operated before the lubricant is warm
enough, the machine life will be shortened.
A
Do not operate the machine under full load until it is
sufficiently warmed.
A
Do not use starting fluid or ether.
A
When the ambient temperature is less than -15
,
remove the battery from the machine and store it
somewhere warm until the next operation.
4. Make sure that the PTO lever is in the
"DISENGAGED" position.
(1) PTO lever
: "ENGAGED"
: "DISENGAGED"
5. Set the throttle lever 1/2 way forward.
(1) Throttle lever
: "FAST"
: "SLOW"
6. Insert the key into the key switch and
turn clockwise 1 notch.
Make sure the easy checker lights are
ON.
OFF............ The position where the key can be
inserted into or removed from the
key switch. [When the key is turned
to this position, the engine shuts off.]
ON.............. The engine keeps running.
PREHEAT... The super glow plug is heated.
START........ Apply the parking brake and turn the
key switch to this position to start the
engine.
: "OFF"
: "ON"
: "PREHEAT"
: "START"
