OPERATING THE MACHINE
22
ENGLISH
B
Hourmeter
The hourmeter indicates in 5 digits the hours the machine
has been used; the last digit indicates 1/10 of an hour.
A
As the hour meter works electrically, it starts to work
when the key switch is turned to "ON", regardless of
the engine running or not.
PARKING
B
Parking
To avoid serious injury:
Before leaving the operator's position:
A
Apply parking brake.
A
Lower all implements to the ground.
A
Shut off the engine.
A
Remove the key.
1. When parking, be sure to set the parking brake.
To apply the parking brake;
Depress the brake pedal firmly with your right foot and
the parking brake pedal simultaneously with your left
foot. Then release the brake pedal while holding the
parking brake pedal down.
2. Before getting off the machine, disengage the PTO,
lower all implements to the ground, place all control
levers in their "NEUTRAL" positions, set the parking
brake, stop the engine and remove the key.
3. If it is necessary to park on an incline, be sure to chock
the wheels to prevent accidental rolling of the
machine.
(1) Hours used
(1) Chocks
