41
PERIODIC SERVICE
ENGLISH
B
Checking Engine Oil Level
To avoid serious injury:
A
Always stop the engine and remove the key
before checking oil.
1. Check engine oil before starting and 5 minutes or more
after the engine has stopped.
2. Wipe dipstick area clean.
3. To check the oil level, remove the dipstick, wipe it
clean, replace it, and draw it out again. Check to see
that the oil level is between the 2 notches.
4. Add new oil to the prescribed level at the oil port if
necessary.
A
When using a different brand or viscosity oil from the
previous one, remove all of the old oil and oil filter.
Never mix 2 different types of oil.
A
Use the proper Engine Oil SAE according to the
ambient temperatures. (See "LUBRICANTS, FUEL
AND COOLANT" in "MAINTENANCE" section.)
While sitting in
the operator's
seat
1
Speed control pedal
Brake pedal
2
Brake lock
---
3
Other movable parts
Turning the
key switch "on"
1
Performance of the
easy checker light
Starting the
engine
1
Color of the exhaust
fumes
---
2
Engine start system,
OPC system, PTO
control system.
If either of these do not
operate properly,
contact your local
KUBOTA Dealer
immediately.
3
Check for abnormal
noise and vibration.
---
Others
1
Check the areas where
previous trouble was
experienced.
---
No.
Check item
Ref.
Page
(1) Engine oil port
(1) Oil level dipstick
(A) "UPPER LEVEL"
(B) "LOWER LEVEL"
