29
OPERATING THE MOWER
ENGLISH
[RCK48]
[RCK42]
Reference
A
Set the position for a recommended ground clearance
of 19 mm (3/4 in.).
(Figure shows a setting position of cutting height 50 or
55 mm (2.0" or 2.25"))
(1) Anti-scalp roller (Rear)
Cutting height
inch (mm)
Position of bolts
(Ref.) Ground
clearance
between rollers
and the ground
1" (25) *1
1
6 mm (0.2 in.)
1.25" (32) *2
12.4 mm (0.5 in.)
1.5" (38)
19.0 mm (0.7 in.)
1.75" (44)
25.4 mm (1.0 in.)
2.0" (50)
2
19.0 mm (0.7 in.)
2.25" (58)
25.4 mm (1.0 in.)
2.5" (64)
3
19.0 mm (0.7 in.)
2.75" (70)
25.4 mm (1.0 in.)
3.0" (76) *3
(31.8 mm) (1.3 in.)
3.5" (89) *3
(44.6 mm) (1.8 in.)
4.0" (102) *3
(57.4 mm) (2.3 in.)
*1. Cutting height 1" is a ground clearance of 6 mm.
*2. Cutting height 1.25" is a ground clearance of 12.4
mm.
*3. For cutting heights above 3.0". The anti-scalp rollers
will still be effective against scalping.
Summary of Contents for GR1600-II
