S-84
J SERIES, WSM
ENGINE
Idle Gear Side Clearance
1. Set a dial indicator with its tip on the idle gear.
2. Measure the side clearance by moving the idle gear to the front
and rear.
3. If the measurement exceeds the allowable limit, replace the idle
gear collar.
[Z482, D722]
[D1005, V1305]
W11286770
Camshaft Side Clearance
1. Set a dial indicator with its tip on the camshaft.
2. Measure the side clearance by moving the cam gear to the font
and rear.
3. If the measurement exceeds the allowable limit, replace the
camshaft stopper.
[Z482, D722]
[D1005, V1305]
W11299720
Camshaft Alignment
1. Support the camshaft with V blocks on the surface plate at both
end journals.
2. Set a dial indicator with its tip on the intermediate journal.
3. Measure the camshaft alignment.
4. If the measurement exceeds the allowable limit, replace the
camshaft.
W11312720
Idle gear side clearance
Factory spec.
0.20 to 0.46 mm
0.0079 to 0.0180 in.
Allowable limit
0.60 mm
0.0236 in.
Idle gear side clearance
Factory spec.
0.20 to 0.51 mm
0.0079 to 0.0201 in.
Allowable limit
0.80 mm
0.0315 in.
Camshaft side
clearance
Factory spec.
0.15 to 0.31 mm
0.0059 to 0.0122 in.
Allowable limit
0.50 mm
0.0197 in.
Camshaft side
clearance
Factory spec.
0.07 to 0.22 mm
0.0028 to 0.0087 in.
Allowable limit
0.30 mm
0.0118 in.
Camshaft alignment
Allowable limit
0.01 mm
0.0004 in.
KiSC issued 10, 2016 A
Summary of Contents for J106-AUS
