S-85
J SERIES, WSM
ENGINE
Cam Height
1. Measure the height of the cam at its highest point with an outside
micrometer.
2. If the measurement is less than the allowable limit, replace the
camshaft.
[Z482, D722]
[D1005, V1305]
W11324040
Oil Clearance of Camshaft Journal
1. Measure the camshaft journal O.D. with an outside micrometer.
2. Measure the cylinder block bore I.D. for camshaft with a cylinder
gauge, and calculate the oil clearance.
3. If the oil clearance exceeds the allowable limit, replace the
camshaft.
[Z482, D722]
[D1005, V1305]
W11335580
Cam height of intake
and exhaust
Factory spec.
26.88 mm
1.0583 in.
Allowable limit
26.83 mm
1.0563 in.
Cam height of intake
Factory spec.
28.80 mm
1.1339 in.
Allowable limit
28.75 mm
1.1319 in.
Cam height of exhaust
Factory spec.
29.00 mm
1.1417 in.
Allowable limit
28.95 mm
1.1398 in.
Oil clearance of
camshaft journal
Factory spec.
0.050 to 0.091 mm
0.00197 to 0.00358 in.
Allowable limit
0.15 mm
0.0059 in.
Camshaft journal O.D.
Factory spec.
32.934 to 32.950 mm
1.2966 to 1.29724 in.
Camshaft Bearing I.D.
(Cylinder block bore
I.D.)
Factory spec.
33.000 to 33.025 mm
1.29921 to 1.30020 in.
Oil clearance of
camshaft journal
Factory spec.
0.050 to 0.091 mm
0.00197 to 0.0358 in.
Allowable limit
0.15 mm
0.0059 in.
Camshaft journal O.D.
Factory spec.
35.934 to 35.950 mm
1.41473 to 1.41535 in.
Cylinder block bore I.D.
Factory spec.
36.000 to 36.025 mm
1.41732 to 1.41830 in.
KiSC issued 10, 2016 A
Summary of Contents for J106-AUS
