S-91
J SERIES, WSM
ENGINE
Crankshaft Side Clearance (Continued)
• Oversize dimensions of crankshaft journal
[Z482, D722]
[D1005, V1305]
W11586190
Crankshaft Alignment
1. Support the crankshaft with V blocks on the surface plate at both
end journals.
2. Set a dial indicator with its tip on the intermediate journal.
3. Measure the crankshaft alignment.
4. If the measurement exceeds the allowable limit, replace the
crankshaft.
W11613530
Oversize
0.2 mm0.008 in.
0.4 mm0.016 in.
Dimension
A
23.40 to 23.45 mm0.9134 to
0.9154 in.
23.80 to 23.85 mm
0.9213 to 0.9232 in.
Dimension
B
46.1 to 46.3 mm1.815 to
1.823 in.
46.3 to 46.5 mm
1.815 to 1.831 in.
Dimension
C
1.8 to 2.2 mm radius0.071 to
0.087 in. radius
1.8 to 2.2 mm radius
0.071 to 0.087 in. radius
(0.8-S)
The crankshaft journal must be fine-finished to higher than .
Oversize
0.2 mm0.008 in.
0.4 mm0.016 in.
Dimension
A
28.20 to 28.25 mm1.1102 to
1.1122 in.
28.40 to 28.45 mm
1.1181 to 1.1201 in.
Dimension
B
51.5 to 51.7 mm2.028 to
2.035 in.
51.6 to 51.8 mm
2.031 to 2.039 in.
Dimension
C
2.3 to 2.7 mm radius0.091 to
0.106 in. radius
2.3 to 2.7 mm radius
0.091 to 0.106 in. radius
(0.8-S)
The crankshaft journal must be fine-finished to higher than .
Crankshaft alignment
Allowable limit
0.02 mm
0.0008 in.
KiSC issued 10, 2016 A
Summary of Contents for J106-AUS
