Operation
60
Explanation of the display indications
If the starter switch is switched in position RUN, the time (3), the en-
gine speed (4) and the hours of operation (5) can be indicated in the
display (2).
For the selection of the display indication, press the display selector
switch (1) until the desired indicator appears in the display.
!
Press the display selector switch (1).
In the display, the hours of operation are indicated for about 10 sec-
onds.
Setting the clock
!
Turn the starter switch to the RUN position.
!
Press menu button (2).
!
Press display selector switch (1) until the clock shows in the
display (3).
By pressing and holding of the display selector switch (1) the follow-
ing are selected in this order: year, month, day, 12 or 24 hour indi-
cator, hours and minutes for adjusting.
!
Press display selector switch (1) and hold down.
!
Press menu button (2) to reduce the numerical value.
!
Press display selector switch (1) to increase the numerical value.
!
To store the setting of the clock and to finish, press the display selector switch (1) once more and hold it down.
The following function can be carried out when the key
is not in the starter switch.
When carrying out the setting process, the value to be
adjusted will blink up in the display and the indicator (4)
on the display and control unit.
If the battery is separated from the electricity network, the data of the clock are deleted. After recom-
missioning the indicator Set clock blinks and requests the renewed setting of the clock.
2
1
3
4
5
1
2
3
4
