Operation
96
To turn on the washer system
The washer system can be operated irrespective of whether the
wiper is on or off.
If the wiper is on:
!
Press the switch (1) to the WIPER/WASHER position again
and hold it down.
If the wiper is off:
!
Press the switch (1) to the OFF position and hold it down.
The washer system runs for as long as the switch is held down.
Operating the interior light (cab version)
!
The starter switch is in the RUN position.
!
Press the switch (2) to the ON position.
The interior light (1) is illuminated as long as the switch remains in
this position.
!
To switch off, press the switch (2) to the OFF position.
Operating the rotary beacon (accessories)
!
The starter switch is in the RUN position.
!
Press the rotary beacon switch (1) to the ON position.
The rotary beacon operates as long as the switch remains in this po-
sition.
!
To switch off the rotary beacon, press the switch to the OFF po-
sition.
Do not operate the washer system if its reservoir is empty as running dry could damage the pump.
1
1
2
OFF
ON
1
