Operation
97
Operating the 12 V plug
!
Open the cover cap (1) and put the load into the 12 V plug.
Opening and closing the cab door (cab version)
Opening the cab door from outside
!
Unlock the cab door at the door lock (3).
!
Open the cab door by pulling at the door handle (1) and lock the
door by attaching the hook (2) at the cab wall.
Closing the cab door
!
Pull out release lever (1) and pull cab door shut until it latches.
The rated current of the connected load must not ex-
ceed 10 A.
1
1
2
3
1
