LIFTING OF THE EXCAVATOR
52
2. Attaching the steel cables or straps.
(1) Always hook the excavator at three points. (one
on the boom and left and right of the dozer)
(2) Always use a shackle on each lifting hole when
attaching the cables or straps.
(3) Keep the angle between the front and rear cables
or straps within 19 (0.33 rad.).
A
While lifting, carefully keep the machine well balanced
with its center of gravity in mind.
A
Do not lift the machine with the boom swinging or the
upper structure swiveling.
3. Tackle
The weights of the excavators and the recommended
tackle for lifting these loads are mentioned in the
following table. Choose components having enough
strength.
*Excavator Weight: With Angle blade, steel tracks.
Steel wire: 6X24
4. Lifting
(1) Lift slowly and safely
(2) Do not enter the excavator area when lifting.
(3) Lift the excavator horizontally. (Modify cable or
strap connections according to needs)
Maximum strength
for example : (JIS G 35 25) - "6 x24"
(1) Cable or strap
(A) 19 (0.33 rad.) or less
Excavator Weight*
CANOPY
CAB
3530 kg
(7780 lbs)
3675 kg
(8105 lbs)
Load / Cable
9100 N (2050 lbs)
Minimum Wire Diameter
(Safety factor=6)
12.5 mm (1/2 in.) or more
Diameter
zinc-plated
not zinc-plated
10 mm (3/8)
45.8 KN (10296 lbs)
49.3 KN (11083 lbs)
12.5 mm (1/2)
71.5 KN (16074 lbs)
77 KN (17310 lbs)
14 mm (9/16)
89.7 KN (20165 lbs)
96.6 KN (21717 lbs)
16 mm (5/8)
117 KN (26303 lbs)
126 KN (28326 lbs)
18 mm (45/64)
148 KN (33272 lbs)
160 KN (35969 lbs)
Summary of Contents for KX033-4
