CHECKS BEFORE START
8
B
Display Selector Switch
Press the display selector switch while the engine is
running. The LCD meter display will change from one
indication mode to the other.
Change the
two-mode
display according to your jobs.
C
AUX port in use
A
Even with the starter key not yet inserted, press the
electronic meter's user setting switch or the display
selector switch, and the LCD shows the hour meter,
fuel gauge, water temperature gauge and clock for 10
seconds.
B
LCD Display for Normal Operation
C
Fuel gauge
To avoid personal injury or death:
A
Before adding fuel, be sure to stop the engine.
A
Be sure to keep open flame away from the
machine. Otherwise a fire may result.
With the starter key at the "
RUN
" position, the fuel
remaining in the fuel tank is indicated in the block.
If the fuel runs short, open the cap and refuel the tank.
A
If the fuel gauge indicator is near the
"E"
or the
"FUEL"
message appears, add fuel as soon as
possible. If the indicator is near
"E"
and the machine
is operated on a slope, the engine may run out of fuel.
(1) Display selector switch
(1) Display selector switch
(1) Fuel gauge
(1) Fuel cap
Summary of Contents for KX080-4S2
