ASSEMBLY INSTRUCTIONS
6
3. Raise the boom until the stands can be rotated.
4. Remove the spring pins holding the stands to the
boom.
5. Rotate the stands until the pin on the stand and hole in
the boom are aligned.
Then slide the stands outward and insert the spring pin
as shown.
6. Apply the danger labels in position as shown below.
[LA525] Quick Hitch
B
Main Frame
A
Before attaching the main frames, ensure all
contaminates (grease, grit, dust, etc.) are removed
from the threads and all mating surfaces. If oil or
contamination has adhered, clean off thoroughly
before assembling (by using contact cleaner,
scrapers, etc.). If oil or contamination remains on the
threads, it may lead to damaged threads and the
loosing of hardware and/or parts.
1. Remove plastic plugs and any excess paint from
tractor body bolt locations.
2. Attach the main frame LH and RH to the flywheel
housing and tractor frame as shown.
Tightening torque : 226 N-m (23 kgf-m, 166 ft-lbs)
A
Do not tighten until all components are assembled.
(1) Belt sling
(1) Stand
(2) Spring pin
(1) 2-Labels, danger
(Part No. 7J802-3648-5)
(2) Boom
(A) 50 mm (1.97 in.)
(B) 10 mm (0.39 in.)
(1) 8-M16 x 40 bolts
8-M16 spring lock washers
8-5/8 hardened plain washers
(2) 8-M16 x 40 bolts
8-M16 spring lock washers
