11
ASSEMBLY INSTRUCTIONS
PRE-OPERATION CHECK
B
Lubrication
Lubricate all grease fittings with grease.
High quality grease designating "extreme pressure" and
containing Molybdenum disulfide is recommended.
This grease may specify "Moly EP" on its label.
B
Transmission Fluid
Check the tractor transmission fluid level. Add fluid if
necessary. Refer to the tractor operator's manual for
instructions and proper fluid. Repeat this check after
purging air from the system. At that time, it will be
necessary to add transmission fluid.
A
To check the tractor transmission fluid level, lower the
bucket to the ground and lower the 3-point hitch.
[Manual Transmission Type]
[HST Type]
B
Hydraulic Hose
When connecting the four hoses to the control valve,
adjust the route of the hoses as shown.
(1) Dipstick
(A) Oil level is acceptable within this range
(1) Dipstick
(A) Oil level is acceptable within this range
(1) Oil inlet
(1) Hydraulic hose
(2) Hose guide
