5
ASSEMBLY INSTRUCTIONS
1. Remove the sub frame bracket from the tractor.
A
Reuse the bolts fastening the sub frame bracket.
2. Attach the main frame to the tractor.
3. Attach the main frame connector as shown.
A
Do not tighten until all components are assembled.
(1) Sub frame bracket
(2) 3-M12 bolts
(3) 3-M14 bolts
(1) Main frame
(2) 1-M14 bolt
1-M14 spring lock washer
(3) 3-M12 bolts (pitch 1.75) (Original)
3-M12 spring lock washers (Original)
(4) 3-M14 bolts (pitch 1.75) (Original)
3-M14 spring lock washers (Original)
(2)
(4)
Tightening torque
124 to 147 N m
(12.6 to 15.0 kgf m)
(91.5 to 108.4 lbf ft)
(3)
Tightening torque
80.0 to 90.0 N m
(8.2 to 9.2 kgf m)
(59.0 to 66.4 lbf ft)
(1) Main frame connector
(2) 8-M14 bolts
8-M14 spring lock washers
Tightening torque
124 to 147 N m
(12.6 to 15.0 kgf m)
(91.5 to 108.4 lbf ft)
